WHAT'S NEW AT G&S METALS

Argentium 1/2 Hard Round Wire

Yellow Gold Filled
1/2 Hard Round Wire

EARRING POST - FRICTION - TRUPD

PURCHASE BI-METAL SILVER AND GOLD, OR TWO-TONE METAL FLAT SHEET ONLINE

ARGENTIUM SILVER BEZEL STRIP click

LASER WIRE
click

YELLOW GOLD FILLED CURVED TUBING
Used as bracelet elbows and necklace elbows

The TRUSEAT® SETTINGS are scientifically designed to reduce your labor and jewelry waste. This scientific standardized system accommodates 90% of all diamond sizes and shapes. Less time is required by skilled jewelers and less skill is needed to produce consistent results >>> more

MARTINI 4 PRONG EARRINGS ARE HERE!!

Martini 4 prong earrings
in 14K yellow gold

Martini 4 prong earrings
in 14K white gold

EXTRA WHITE CASTING GRAIN WITHOUT RHODIUM PLATING

14K EXTRA WHITE CASTING GRAIN (14WXCG) Liquidus 1730° F

18K EXTRA WHITE CASTING GRAIN (18WXCG) Liquidus 1702° F

Casting Temperature: 150° F - 225° above Liquidus Temperature

Extra (X) white 14K Casting Grain and Extra (X) white 18K Casting Grain contain a higher nickel content than traditional white casting grain but do not require Rhodium plating to achieve a good white color. Torch melting has proven successful. There is no melt protections. Be careful not to overheat – see extra white gold pendant by Miner's Den in our Testimonials.

Annealing: Heat in an oven set to 1350-1400º F for 20 minutes, depending on the size of the castings. Quench immediately for 2-4 minutes. Do not allow to air cool. Under certain conditions, all nickel-white gold alloys are susceptible to stress corrosion.

14KXCG casts like 18KWCG
Use 14K White Hard Solder or 19W Weld solder for sizing